网站首页 >行业资讯

真空泵标准 汇总大全

录入时间:
2009-5-21
文章来源:
正文:

标准编号
标准中文名称
标准英文名称
JB/T7265-2004
蒸汽流真空泵
 
UL 1450-2003
电动空气压缩机、真空泵和喷漆设备
(Motor-operated air compressors, vacuum pumps, and painting equipment)
JIS B8384-2000
液压.变容真空泵、机动泵和整体传动装置.稳态性能测定
(Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance)
JIS B8317-2-1999
蒸气真空泵.性能特性的测定.第2部分:临界后压力的测定
(Vapour vacuum pumps --Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure)
JIS B8323-2003
水封式真空泵
(Water ring vacuum pumps)
JIS B8317-1-1999
蒸气真空泵.性能特性的测定.第1部分:流量容积比率的测定(泵速)
(Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed))
JIS B8385-2000
液压.变容真空泵、机动泵和整体传动装置.参数定义和字母符号
(Hydraulic fluid power -- Pumps, motors and integral transmission -- Parameter definitions and letter symbols)
JIS Z8126-2-1999
真空技术.词汇.第2部分:真空泵和相关条款
(Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms)
ISO 1607-2-1989
变容真空泵.性能特性测量.第2部分:极限压力的测量
(Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure)
ISO 16330-2003
往复式变容真空泵和泵装置.技术要求
(Reciprocating positive displacement pumps and pump units - Technical requirements)
ISO 3529-2-1981
真空技术.词汇.第2部分:真空泵和有关术语.三种语言版
(Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition)
ISO 1608-2-1989
蒸汽真空泵.性能特性的测量.第2部分:临界前级压力的测量
(Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure)
ISO 1608-1-1993
蒸汽真空泵.性能特性的测量.第1部分:容积流量速度的测量(泵速)
(Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed))
QB/T1444-1992
ZBK型轻式专用两叶罗茨真空泵
 
QB/T1445-1992
湿式罗茨真空泵性能测试方法
 
JB/T6533-2005
旋片真空泵
 
JB/T7674-2005
罗茨真空泵
 
JB/T7675-2005
往复真空泵
 
GB/T19955.1-2005
蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量
 
GB/T19955.2-2005
蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量
 
GB/T19956.1-2005
容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量
 
GB/T19956.2-2005
容积真空泵性能测量方法 第2部分:极限压力的测量
 
JB/T8540-2004
水蒸汽喷射真空泵
 
JB/T10462-2004
水喷射真空泵
 
标准编号
标准中文名称
标准英文名称
NF X10-501-1976
真空技术.词汇.真空泵
(Vacuum technology. Vocabulary. Vacuum pumps.)
ANSI/ASME PTC 9-1974
性能试验规范.容积式压缩机、真空泵和鼓风机
(Performance Test Code - Displacement Compressors, Vacuum Pumps and Blowers)
ANSI/UL 1450-2003
电动空气压缩机、真空泵和涂漆设备
(Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment )
ASME PTC 9 Erratum-1972
容积式压缩机,真空泵和鼓风机.正误表
(Displacement compressors, vacuum pumps, and blowers; Erratum)
ASME PTC 9-1970
容积式压缩机,真空泵和鼓风机
(Displacement compressors, vacuum pumps, and blowers)
BS EN 1012-1-1997
压缩机和真空泵.安全要求.压缩机
(Compressors and vacuum pumps - Safety requirements - Compressors)
BS EN ISO 14847-1999
转式变容真空泵.技术要求
(Rotary positive displacement pumps - Technical requirements)
BS EN 1012-2-1997
压缩机和真空泵.安全要求.真空泵
(Compressors and vacuum pumps - Safety requirements - Vacuum pumps)
EN 1012-1-1996
压缩机和真空泵 安全要求 第1部分:压缩机
Compressors and vacuum pumps - Safety requirements - Part 1: Compressors
EN 1012-2-1996
压缩机和真空泵 安全要求 第2部分:真空泵
Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps
DIN EN 1012-1-1996
压缩机和真空泵.安全要求.第1部分:压缩机
(Compressors and vacuum pumps, safety requirements - Part 1: Compressors; German version EN 1012-1:1996)
DIN EN 1012-2-1996
压缩机和真空泵.安全要求.第2部分:真空泵
(Compressors and vacuum pumps, safety requirements - Part 2: Vacuum pumps; German version EN 1012-2:1996)
DIN 28432-1996
真空技术.膜片真空泵的验收规则
(Vacuum technology - Acceptance specifications for diaphragm vacuum pumps)
DIN 45635-13-1977
机器噪声测量.空气载声测量.包面法.空气压缩机包括真空泵(活塞式.涡轮式和喷射式压缩机)
(Measurement of airborne noise emitted by machines; enveloping surface method, compressors, vacuum pumps included (displacement-, turbo- and jet compressors))
DIN 28426-2-1976
真空技术.旋转活塞真空泵的验收规则.高真空范围内的摇杆式活塞真空泵
(Vacuum technology; acceptance specifications for roots vacuum pumps for the range of medium vacuum)
DIN 28400-2-1980
真空技术.名称和定义.真空泵
(Vacuum technology; terms and definitions, vacuum pumps)
DIN ISO 3019-3-1984
液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第3部分:多边形法兰盘(包括圆形法兰盘)
(Hydraulik fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 3: polygonal flanges (including circular flanges))
DIN ISO 3019-2-1991
液压传动.变容真空泵和马达.装配法兰盘和轴端的尺寸及识别代码.第2部分:两孔与四孔法兰与轴端.米制系列
(Hydraulic fluid power; positive displacement pumps and motors; dimensions and identification code for mounting flanges and shaft ends; part 2: 2 and 4-hole flanges and shaft ends, metric series; identical with ISO 3019-2:1986)
DIN 28426-1-1983
真空技术.旋转真空泵.在近似真空和高真空范围内的闭塞阀真空泵和旋转阀真空泵的验收规则
(Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum)
DIN 28431-1987
真空技术.液体环式真空泵的验收规程
(Vacuum technology; acceptance specifications for liquid ring vacuum pumps)
DIN 28427-1983
真空技术.蒸气压低于1mbar的扩散泵和蒸气喷射真空泵的验收规则
(Vacuum technology; acceptance specifications for diffusions pumps and vapour jet vacuum pumps for vapour pressures of the pump fluid 1 mbar)
DIN 28430-1984
真空技术.以蒸汽作为驱动介质的蒸汽喷射真空泵和蒸汽喷射压缩机用测量规则
(Vacuum technology; rules for the measurement of steam jet vacuum pumps and steam jet compressors using steam as the working fluid)
JB/T6921-2004
罗茨真空泵机组
 
JB/T8540-2004
水蒸汽喷射真空泵
 
JB/T10462-2004
水喷射真空泵
 
标准编号
标准中文名称
标准英文名称
JB/T7265-2004
蒸汽流真空泵
 
UL 1450-2003
电动空气压缩机、真空泵和喷漆设备
(Motor-operated air compressors, vacuum pumps, and painting equipment)
JIS B8384-2000
液压.变容真空泵、机动泵和整体传动装置.稳态性能测定
(Hydraulic fluid power -- Positive displacement pumps, motors and integral transmissions -- Determination of steady-state performance)
JIS B8317-2-1999
蒸气真空泵.性能特性的测定.第2部分:临界后压力的测定
(Vapour vacuum pumps --Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure)
JIS B8323-2003
水封式真空泵
(Water ring vacuum pumps)
JIS B8317-1-1999
蒸气真空泵.性能特性的测定.第1部分:流量容积比率的测定(泵速)
(Vapour vacuum pumps -- Measurement of performance characteristics -- Part 1: Measurement of volume rate of flow (pumping speed))
JIS B8385-2000
液压.变容真空泵、机动泵和整体传动装置.参数定义和字母符号
(Hydraulic fluid power -- Pumps, motors and integral transmission -- Parameter definitions and letter symbols)
JIS Z8126-2-1999
真空技术.词汇.第2部分:真空泵和相关条款
(Vacuum technology -- Vocabulary -- Part 2: Vacuum pumps and related terms)
ISO 1607-2-1989
变容真空泵.性能特性测量.第2部分:极限压力的测量
(Positive-displacement vacuum pumps; measurement of performance characteristics; part 2: measurement of ultimate pressure)
ISO 16330-2003
往复式变容真空泵和泵装置.技术要求
(Reciprocating positive displacement pumps and pump units - Technical requirements)
ISO 3529-2-1981
真空技术.词汇.第2部分:真空泵和有关术语.三种语言版
(Vacuum technology; Vocabulary; Part 2 : Vacuum pumps and related terms Trilingual edition)
ISO 1608-2-1989
蒸汽真空泵.性能特性的测量.第2部分:临界前级压力的测量
(Vapour vacuum pumps; measurement of performance characteristics; part 2: measurement of critical backing pressure)
ISO 1608-1-1993
蒸汽真空泵.性能特性的测量.第1部分:容积流量速度的测量(泵速)
(Vapour vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed))
QB/T1444-1992
ZBK型轻式专用两叶罗茨真空泵
 
QB/T1445-1992
湿式罗茨真空泵性能测试方法
 
JB/T6533-2005
旋片真空泵
 
JB/T7674-2005
罗茨真空泵
 
JB/T7675-2005
往复真空泵
 
GB/T19955.1-2005
蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量
 
GB/T19955.2-2005
蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量
 
GB/T19956.1-2005
容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量
 
GB/T19956.2-2005
容积真空泵性能测量方法 第2部分:极限压力的测量
 
JB/T8540-2004
水蒸汽喷射真空泵
 
JB/T10462-2004
水喷射真空泵
 

产品系列